Go to Website
icon-eye 11th March 2016 | Newsletter 1           
REYMA Reotix

icon-twitter-border icon-googleplus-border icon-youtube-border
New Website
we have renewed our online image in Reyma Reotix Refractory Materials, with new contents and images in order to offer our customers a more modern and contemporary communication platform. Visit our new website!
Reyma Reotix Participates in  CONAC (Mexico)
Congress and Exhibition of the Steel Industry, to be held from 14 to 17 March 2016 in Monterrey, N.L., Mexico. We also present a conference on REFRACTORY CONCRETES WITHOUT CEMENT FOR THE STEEL INDUSTRY. THE SOL-GEL SYSTEM. 
icon-check FROM 14 TO 17 MARCH                         
icon-check STAND 7A
Technical Article: PROTIX SYSTEM
 Antiwearing refractory concretes
The refractory concretes used to coat different areas of an industrial plant are often not only exposed to high temperatures, but also to continuous wear by abrasion caused by particles in circulation, in the working temperatures.
REYMA has developed a range of refractory concretes which have excellent mechanical strength both towards bending and compression, and very low erosion loss values at both high and low temperatures, even below 100 °C and in the presence of acids; all thanks to a careful study of the matrix grain size. For its monolithic nature they present a number of significant advantages over traditional anti-wear plates and can be applied by different systems and with the possibility of different types of anchor.
Industrial Sectors and Areas of Application
For the above described, the range of anti wearing concrete "PROTIX" is suitable for repair and refractory lining in areas subject to high abrasion in cement plants, petrochemical industry, thermal power plants, etc.

 CEMENT PLANTS: cyclon mills, separators, grate cooler dust duct, chain transport area, satellite coolers, entrance chamber, ramp, tile, entrance arch, ducts in cyclones, cyclones angular point, tad damper and maximum wear areas.

 STEEL AND CASTING INDUSTRY: dust exhaust duct from electric arc furnace, post combustion chamber, SHAFT (scrap preheating duct), fume exit duct and charging area in cupola furnace.

 PETROCHEMICAL: FCCU, gas flowlines, reception areas ash (acid), etc.

 THERMAL POWER PLANTS: bins and ashtrays.

 OTHER: upper zones in lime vertical kilns, cyclones and separators in the aggregates industry, discharging ramps and wagons in the mining and coke industry, filters, chimneys, etc.
Advantages of antiwearing concrete lining sistems
 Can be applicated in big surfaces without geometrical restrinctions.
 Variable thiknesses depending on the zone.
 No joints.
 No specific machine.
 Possibility to make preshaped blocks.
 Short application times, cost reduction.
 Up to 100m2/day performance with a 25mm thicknes.
 Can be combined with isolating layers in order to minimize the heat lost.
icon_circle-twitter icon_circle-googleplus icon_circle-youtube
Copyright 2016 Reyma Materiales Refractarios, SA | Newsletter | 11th March 2016

This email was sent to <<Email Address>>
why did I get this?    unsubscribe from this list    update subscription preferences
Reyma Reotix Materiales Refractarios · Ctra. Luchana-Asúa, 24 · Asua-Erandio, Bizkaia 48950 · Spain